Andra säljare på Amazon
GRATIS hem- och ombudsleverans på första beställningen skickad av Amazon. Detaljer
100 % positiva under de senaste 12 månaderna
+ 59,00 kr frakt
65 % positiva under de senaste 12 månaderna
Bild otillgänglig
Färg:
-
-
-
- För att visa den här videonedladdningen Flash Player
Gelid Solutions GP-EXTREME|Termisk Dyna 80x40x1.0mm|Utmärkt Värmeledning|Idealiskt Mellanrum|Enkel Installation|Värmeledningsförmåga 12W/mK.
Förbättra ditt köp
Varumärke | Gelid Solutions |
Watt | 12.00 |
Antal processorer | 1 |
Om denna artikel
- ULTIMATE THERMAL CONDUCTIVITY: Med en värmeledningsförmåga på 12W / mK erbjuder GP-EXTREME förstklassig prestanda.
- ENKEL TILLÄMPNING: GP-EXTREME är lätt att använda tack vare sina termiska dimensioner på 80x40mm.
- Icke-elektrisk konduktivitet: GP-EXTREME är icke-elektriskt ledande, icke-frätande, icke-härdande och giftfri.
- PERFEKTA STORLEKAR: GP EXTREME-storlekarna är perfekta för PCB-ytor, VGA-kort, bärbara datorer, spelkonsoler, mikrokontroller, minnes-IC och andra SMD-komponenter.
- TILLGÄNGLIGHETEN AV TUNNEN: GP-EXTREME finns i olika tjocklekar på 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm och 3,0 mm.
Vill du återvinna dina elektriska eller elektroniska apparater gratis? Läs mer |
Produktinformation
- Produkten har slutat tillverkas : Nej
- Produktens mått : 8 x 4 x 0.1 cm; 1 Gram
- Tillverkare : Gelid Solutions
- ASIN : B01AAHM1WW
- Artikelnummer : 80x40x1.0
- Kundrecensioner:
Köps ofta tillsammans
- +
Kunder som tittade på denna artikel tittade även på
Produktbeskrivning
GP-Extreme är utformad för att ge perfekt värmekontakt till kylflänsen när den installeras på kretskort med höjdskillnader och ojämna ytor som mikrokontroller, minnes-IC, analoga IC, MOSFET och andra SMD-komponenter. Tack vare sin mjukhet och ultimata värmeledningsförmåga fyller GP-Extreme utrymmen ordentligt och erbjuder bästa prestanda i klassen. GP-Extreme är icke-ledande, icke-frätande, icke-härdande och giftfri. GP-Extreme garanterar en enkel applikation och värmepadsdimensionerna 80 × 40 mm passar optimalt till stora PCB-ytor på VGA-kort, bärbara datorer, spelkonsoler och andra tätt packade enheter
Kundrecensioner
Kundrecensioner, inklusive stjärnrecensioner av produkter, hjälper kunder att lära sig mer om produkten och avgöra om det är rätt produkt för dem.
Vi använder inte ett enkelt medelvärde för att beräkna den totala stjärnrecensionen och den procentuella fördelningen per stjärna. Istället tar vårt system hänsyn till saker som till exempel hur nyligen en recension har gjorts och om recensenten köpte artikeln på Amazon. Det analyserar också recensioner för att verifiera deras trovärdighet.
Läs mer om hur kundrecensioner fungerar på Amazon-
Populäraste recensionerna
Toppenrecension från Sverige
Det gick inte att filtrera recensionerna just nu. Försök igen senare.
Populäraste recensionerna från andra länder

I tried the 2mm pads, but they were too thick for my cooler, even when you try to flattern them, this did not work.
Seems older coolers on the 3080 use the 2mm pads.
As pictured, my cooler manufactured date is 17th May 2021, so there seems to be a difference between 3080 Ti and 3080 coolers.
Best to check your cooler M/date and research what pad thickness you need.
When using 2mm pads, the cooler was not making good contact with the GPU Die, even with plenty of thermal paste applied. As soon as you put load on the card, the temps would go to to its thermal throttle limits. Not good.
With 1.5mm pads on the VRAMs and 3mm on the back of the card, the temps dropped ~10c on my VRAMs.
Using Noctua HT-N2 paste, I saw about ~5c drop on the core.


Recenserad i Storbritannien den 21 december 2021
I tried the 2mm pads, but they were too thick for my cooler, even when you try to flattern them, this did not work.
Seems older coolers on the 3080 use the 2mm pads.
As pictured, my cooler manufactured date is 17th May 2021, so there seems to be a difference between 3080 Ti and 3080 coolers.
Best to check your cooler M/date and research what pad thickness you need.
When using 2mm pads, the cooler was not making good contact with the GPU Die, even with plenty of thermal paste applied. As soon as you put load on the card, the temps would go to to its thermal throttle limits. Not good.
With 1.5mm pads on the VRAMs and 3mm on the back of the card, the temps dropped ~10c on my VRAMs.
Using Noctua HT-N2 paste, I saw about ~5c drop on the core.



Thermally I can't actually definitive answer as to how much it dropped temperatures, because I was actually installing an aftermarket dual water block on my GPU so it wouldn't be a like-for-like comparison... The water blocks did come with thermal pants, however like I say, having already spent a fortune, I wanted to install the best...
What I can say is that with the hefty AIB three slot triple fan blower on the card with stock pads and compund, I was getting about 80C degrees on the GPU die, and nearly 90C on the GPU memory... On the dual front and rear EK water blocks with these Gelid thermal pads on the memory, and thermal grizzly kryonaut on the die, both die and memory peak at 62C now. With much lower (and therefore quieter) fan speeds. 👍😁👍

You can try taking the the top off, feeding the air-duster straw through the the back vents and cleaning the heatsink like that.
Better to fully dismantle and clean.
Plus while it's in bits you can replace the pads with these (just cut to size yourself with scissors) and also the thermal paste (I used thermal grizzly)
Ps4pro now whisper quiet,!
At lowest fan setting in all but the most demanding scenarios and hasn't gone to maximum speed since. Gaming is much more relaxing.



Recenserad i Storbritannien den 19 februari 2020



The 2.0mm was what I figured out you needed for the XBox, and from other reviews I gathered I’d need two packs as this is only 8x4cm. Turns out, if you’re not worried about the Southbridge chip on the reverse of the board, you can easily do the 12 RAM chips (about 11x14mm each) and the VRMs with a single sheet of this. As I bought two anyway I used the second pack to do the Southbridge but could have fudged it with the remaining scraps or reused the original pad if I needed to.
All the credit can’t just go to this material as I obviously replaced the paste as well, but the XBox fan has dropped about 25dB and is noticeably quieter. Essentially silent in a normal room on high load from demanding games. I totally believe the higher-than-average specs on this material and it was easy to use and a joy to apply (especially compared to the mess Made taking the stock pads off).
Aside from the rather hefty price tag I’d say this stuff is perfect, and probably overkill for my application, but well recommended!


Recenserad i Storbritannien den 25 maj 2020
The 2.0mm was what I figured out you needed for the XBox, and from other reviews I gathered I’d need two packs as this is only 8x4cm. Turns out, if you’re not worried about the Southbridge chip on the reverse of the board, you can easily do the 12 RAM chips (about 11x14mm each) and the VRMs with a single sheet of this. As I bought two anyway I used the second pack to do the Southbridge but could have fudged it with the remaining scraps or reused the original pad if I needed to.
All the credit can’t just go to this material as I obviously replaced the paste as well, but the XBox fan has dropped about 25dB and is noticeably quieter. Essentially silent in a normal room on high load from demanding games. I totally believe the higher-than-average specs on this material and it was easy to use and a joy to apply (especially compared to the mess Made taking the stock pads off).
Aside from the rather hefty price tag I’d say this stuff is perfect, and probably overkill for my application, but well recommended!
